Adapter Maiwo USB-C SATA Duplicator Enclosure K10635N Color:black

Maiwo USB-C SATA Duplicator Enclosure

The Maiwo K10635N connects a 2.5 or 3.5 inch SATA HDD or SSD and an M.2 NVMe SSD to a computer at the same time. It connects over USB-C using USB 3.2 Gen 2, with up to 10Gbps for the NVMe drive, up to 6Gbps for the SATA drive and UASP support.

Without a computer it clones a whole drive in either direction, NVMe to SATA or SATA to NVMe, for example when moving a system from an old hard drive to a new SSD. A switch sets the clone direction, and four LEDs show the progress. An external power adapter supplies power even for 3.5-inch drives.

Key features

• SATA and NVMe drive together - A bay for 2.5 and 3.5 inch SATA drives and a bay for M key M.2 NVMe drives in 2230, 2242, 2260 and 2280 sizes. The computer sees both drives at once.
• Two-way cloning without a computer - 1:1 cloning from NVMe to SATA or from SATA to NVMe, set by the clone switch. The target drive must be equal to or larger than the source.
• Progress LEDs - Four blue LEDs show cloning progress at 25%, 50%, 75% and 100%, alongside a power LED and activity LEDs for each drive.
• 10Gbps USB-C - USB 3.2 Gen 2 Type-C interface, up to 10Gbps for NVMe and up to 6Gbps for SATA, with UASP for better performance on Windows 8 and later.
• Quick installation - A SATA drive plugs straight into the connector with no screws, and an NVMe drive is held by a silicone screw. A power button and external power adapter let it work with 3.5-inch drives too.
• Compatibility and power saving - The adapter works with Windows, macOS and Linux and goes into automatic sleep when idle.

Specifications

In the box

• Maiwo K10635N adapter
• USB-A to USB-C cable
• 12V 3A power adapter
• User manual