Adapter Riser PCI-E 1X to 16X VER008C

Riser PCI-E 1X to 16X Kit

The VER008C riser kit lets you connect a graphics card to a PCI-E x1 slot on the motherboard and place it away from the board. A small adapter goes into the x1 slot, a 60 cm USB 3.0 cable carries the signal, and the graphics card is installed in the PCI-E x16 slot on the riser board. The kit suits mining rigs and multi-GPU systems.

The riser board takes 12V directly from the power supply through a 6-pin connector, so the graphics card's slot power does not depend on the motherboard, which reduces the load on it when several cards are connected. Four solid capacitors stabilize the power delivery, and a retention clip keeps the card in the slot.

Key features

• Graphics card in an x1 slot - The adapter goes into a PCI-E x1 slot on the motherboard, and the graphics card is installed in the PCI-E x16 slot on the riser board.
• 60 cm USB 3.0 cable - A soft, flexible cable lets you place the graphics card freely and route cables easily.
• Direct PSU power - A 6-pin connector feeds the x16 slot directly from the power supply and reduces the load on the motherboard with multiple cards. A SATA to 6-pin cable is included.
• Four solid capacitors - Solid capacitors make the power supply to the graphics card more stable and safe.
• Retention clip - A clip on the x16 slot makes it easier to install and remove the card and stops it from falling out.

Specifications

In the box

• PCI-E x16 riser board
• PCI-E x1 adapter
• USB 3.0 cable, 60 cm
• SATA to 6-pin power cable