Adapter NZXT BRACKET SOCKET 1700 FOR KRAKEN X/Z PM-KXZSAB0-000

NZXT BRACKET SOCKET 1700 FOR KRAKEN X/Z

The NZXT PM-KXZSAB0-000 is the set of mounting tools that lets you install an NZXT Kraken X or Z series liquid cooler on a motherboard with an Intel LGA1700 socket. It contains an LGA1700 bracket for the pump head, a backplate and four standoffs.

Swapping the bracket is simple: remove the pre-installed Intel bracket from the pump by pushing and rotating it counterclockwise, then fit the LGA1700 bracket by pushing and rotating it clockwise. The rest of the installation follows the cooler's manual.

Key features

• Your Kraken on a new platform - After moving to an LGA1700 motherboard you can keep using your Kraken X or Z series cooler instead of buying a new one.
• Complete LGA1700 kit - A pump bracket, a backplate and four standoffs: everything needed to adapt the cooler to the new socket.
• Twist-on bracket swap - The old bracket comes off with a push and a turn, and the new one locks on the same way. Give it a light wiggle to make sure it is seated.
• Backplate and standoffs mounting - The pump head is anchored to a backplate with standoffs for even pressure on the CPU and a stable fit.

Specifications

In the box

• LGA1700 pump bracket
• Backplate
• 4 x standoffs