Case LIAN-LI LANCOOL 216 RGB black Mid Tower

LIAN-LI LANCOOL 216 RGB Mid Tower Case Black

The Lian Li LANCOOL 216 RGB is a black mid-tower case designed around airflow. It has mesh at the front, on top and beside the PSU shroud, and the front mesh continues into the top panel. Two 160mm ARGB fans with two lighting channels are installed in the front, plus a 140mm PWM fan in the rear.

The modular rear panel lets you place the motherboard higher for air cooling or lower for water cooling, leaving a 63mm gap above the board for a radiator and fans. The case supports ATX, Micro-ATX and Mini-ITX boards, E-ATX boards up to 280mm wide, graphics cards up to 392mm long and CPU coolers up to 180.5mm tall.

Key features

• All-around mesh - Mesh panels at the front, on top and beside the PSU shroud, with a continuous front-to-top mesh, keep fresh air flowing to every component.
• 160mm ARGB fans - The two front fans have two LED channels, on the outer rim and at the blade shaft, controlled through the motherboard lighting software (5V 3-pin header) or an optional accessory. A SATA-powered hub behind the motherboard supports up to 4 ARGB and PWM fans.
• Air-cooling and water-cooling modes - The modular rear I/O lets you raise the motherboard for wider fans above the PSU shroud, or lower it to free 63mm at the top for a radiator and fans.
• PCIe fan bracket and vertical GPU - In air-cooling mode an extra 120mm fan can be added at the rear next to the expansion slots for better GPU cooling. The slot panel rotates for a vertical graphics card with an additional riser cable.
• Easy building - The top radiator bracket is fully removable, a seal plate prevents pressure leaks when a radiator or fans shorter than 360mm are installed, and the front I/O can be moved to the lower left side of the front panel.
• Storage and cable management - Room for 6 x 2.5" and 2 x 3.5" drives, and velcro straps and clips along the case keep cables out of the airflow path.

Specifications