| Revew | Gamdias AEOLUS P2-1203U Black Fan KitThe Gamdias AEOLUS P2-1203U combines three 120 mm case fans with a USB AEOLUS BOX II controller. The fans have 30 mm thick frames, hydraulic bearings and PWM control, link to each other through a cableless daisy-chain design and come with reversed blades for choosing the airflow direction. The controller connects to the PC over USB, so the lighting and fan speeds can be set in ZEUS CAST software, including a temperature-based speed curve and real-time speed monitoring. It supports up to 16 fans and can also sync with motherboard lighting. 
Key features- Cableless daisy-chain design - Each AEOLUS P2 fan locks onto the next one through a built-in interlocking structure, so the three fans link up without a separate cable for each fan and the wiring inside the case stays tidy.
- Swappable blades for either airflow direction - The kit includes three pre-installed standard blades and three reversed blades. Swap the inner blade to switch between intake and exhaust without flipping the fan frame and without giving up the look.
- 30 mm thick frame - The thicker frame enlarges the blade contact surface and the air tunnel: up to 74.97 CFM of airflow and up to 3.1 mmH2O of static pressure at 1000 to 2400 RPM, with a hydraulic bearing and PWM control.
- ARGB lighting on both sides - Two aluminum logo plates in the center, ARGB strips on the frame and infinity mirrors on both sides of the fan, with 32 LEDs in each fan.
- USB AEOLUS BOX II controller - The controller has 4 ports for fan clusters, up to 6 fans per port and up to 16 fans in total, plus support for two LED strips. It is powered by two SATA connectors, and a built-in magnet lets you attach it to the case panel.
- Full control in ZEUS CAST - Set different effects for the inner and outer rings, adjust color, brightness and lighting speed, and set fan speeds in flat or temperature-graph mode, with real-time speed status for each port.
Specifications| Manufacturer | Gamdias | | Model | AEOLUS P2-1203U | | Number of fans | 3 | | Fan size | 120 mm | | Fan dimensions | 120 x 120 x 30 mm | | Fan speed | 1000-2400 RPM ±10% | | Airflow | 74.97 CFM | | Static pressure | 3.1 mmH2O | | Bearing | Hydraulic | | PWM control | Yes | | Rated voltage | 12V (fan) / 5V (LED) | | LEDs | 32 per fan | | Color | Black | | Fan connector | 8-pin to controller | | Controller | USB AEOLUS BOX II | | Controller dimensions | 83 x 59 x 14 mm | | Controller power | 2 x SATA | | Controller support | Up to 16 fans, 2 LED strips | | ARGB sync | 5V 3-pin motherboard header | | Software | ZEUS CAST |
In the box- 3 fans
- 3 reversed fan blades
- USB AEOLUS BOX II
- 4 controller cables
- 2 extension cables
- USB cable
- PWM cable
- Motherboard sync cable
- Lubricant
|
