SSD Disk Corsair MP700 PRO CSSD-F1000GBMP700PNH M.2 2280 1TB

Corsair MP700 PRO SSD

The Corsair MP700 PRO is a PCIe Gen5 x4 SSD with the NVMe 2.0 protocol, a Phison E26 controller and high-density 3D TLC NAND. At 1TB it reaches sequential reads of up to 11,700MB/s and writes of up to 9,600MB/s, and the larger capacities in the series go up to 12,400MB/s.

This is the version without a heatsink, meant to be installed straight into the motherboard M.2 slot under its built-in heatsink. Corsair stresses that a Gen5 drive needs cooling, so make sure the board has a heatsink for the slot and the case has good airflow.

Key features

• Gen5 speed - Sequential reads of up to 11,700MB/s and writes of up to 9,600MB/s at 1TB, with random performance of up to 1,400K IOPS read and 1,500K IOPS write.
• Phison E26 with DRAM - A Phison PS5026-E26 controller with a 2GB DRAM cache and high-density 3D TLC NAND combines high performance with an endurance of 700TB written (TBW).
• No-heatsink version - The drive ships bare and suits motherboards with a built-in M.2 heatsink, such as select Intel Z690, Z790 and AMD 600 series boards. Cooling is required, and in a PCIe Gen4 slot performance is lower.
• Microsoft DirectStorage - In supported games the drive sends data directly to the graphics card for very short load times. Requires a DirectX 12 GPU with Shader Model 6.0 support.
• Reliability and management - An MTBF of 1.6 million hours, AES 256-bit encryption and CORSAIR SSD Toolbox software for drive monitoring and firmware updates.

Specifications

In the box

• MP700 PRO M.2 SSD (no heatsink included, separate cooling required)