PoE Injector Grandstream GS-POE30W-MG

PoE Injector Grandstream GS-POE30W-MG

The Grandstream GS-POE30W-MG is a plug-and-play PoE injector that delivers power and data over a single network cable to devices such as GWN series Wi-Fi access points, IP phones and IP cameras. It is the simple choice when there is no PoE switch on site or when a single PoE device needs to be powered.

The injector has a LAN IN port and a PoE LAN OUT port, both rated up to 2.5Gbps, so it also suits fast access points. The power supply is built into the housing and connects to the outlet with a 1.2 m AC cable.

Key features

• Up to 30.2W PoE - Compliant with IEEE 802.3af and IEEE 802.3at (PoE+), it supplies up to 30.2W to the connected device, enough for access points, IP phones and IP cameras.
• 2.5Gbps network ports - The LAN IN port and the PoE LAN OUT port support up to 2.5Gbps and carry data and power over the same network cable.
• Built-in power supply - The injector connects directly to 100-240VAC, 50/60Hz mains with a 1.2 m AC cable, with no separate external adapter. Output voltage is 54VDC.
• Status LEDs - A blue LED shows that the injector is powered, and a purple LED shows that a PoE load is connected.
• Plug-and-play - No configuration is needed: connect the switch or router to LAN IN and the device to LAN OUT, and the device receives both power and data.

Specifications

In the box

• GS-POE30W-MG injector
• 1.2 m AC cable
• Quick installation guide
• Regulatory paper