Switch PoE Grandstream GWN7811P

Grandstream GWN7811P 8-Port Gigabit Layer 3 Managed PoE+ Switch

The Grandstream GWN7811P is a Layer 3 managed switch from the GWN7810 series with 8 Gigabit Ethernet ports supplying PoE/PoE+ to IEEE 802.3af/at, up to 30W per port within a 120W total budget, plus 2 x 10Gbps SFP+ ports for fast uplinks. It powers IP phones, cameras and Wi-Fi access points over the network cable, and the fanless design suits quiet environments.

Beyond VLANs, QoS and advanced security, the switch supports static and dynamic routing (RIP, OSPF and BGP), stacking of up to 4 switches managed as one system and IEEE 1588v2 time synchronization. It can be managed through the web UI with its embedded controller, GDMS Networking cloud, GWN Manager software, GWN routers and CLI, and ships with kits for 19-inch rack mounting.

Key features

• 8 PoE+ ports - Up to 30W per port within a 120W total budget, with port priority and scheduled PoE.
• 2 x 10G SFP+ ports - 10Gbps uplinks over fiber, RJ45 modules or DAC cables up to 5 m.
• Layer 3 routing - Static and dynamic routing with RIP, RIPng, OSPF, OSPFv3 and BGP, up to 512 IPv4 routes and routing policy.
• Stacking and reliability - Up to 4 switches combined into one logical switch, hardware dual boot, system file redundancy and 32 link aggregation groups.
• Security - 802.1X, MAC authentication, RADIUS and TACACS+, ARP Inspection, IP Source Guard, DoS protection, DHCP Snooping and 2K ACLs.
• Free management - Managed through the web UI with its embedded controller, GDMS Networking cloud, GWN Manager software, GWN routers and CLI, with SNMP, RMON and Syslog.

Specifications

In the box

• GWN7811P switch
• 1.2 m AC power cable
• 25 cm ground cable
• 2 x extended rack-mounting kits
• 4 x rubber footpads
• 8 x M3 x 6 mm screws
• Quick installation guide
• Power cord anti-trip clip