| Revew | Teltonika RUT956 4G LTE Cat 4 Industrial Cellular RouterThe Teltonika RUT956 is an industrial router that combines 4G cellular, Wi-Fi and wired connectivity with automatic WAN failover and GNSS. Its LTE Cat 4 modem reaches up to 150Mbps down and 50Mbps up, and two SIM slots switch to the backup operator on weak signal, data limit, roaming or connection loss. RS232 and RS485 interfaces, digital and analog I/O and RutOS make it possible to connect industrial equipment, control it and receive event notifications. The GNSS receiver supports GPS, GLONASS, BeiDou, Galileo and QZSS, and the router suits transportation, industry, agriculture and security, including UL approval for Class I Division 2 hazardous locations. 
Key features- 4G LTE Cat 4 with dual SIM - Up to 150Mbps down and 50Mbps up with 3G and 2G fallback. Automatic switching between two SIM cards on weak signal, data limit, roaming, no network or connection failure.
- Multi-constellation GNSS - GPS, GLONASS, BeiDou, Galileo and QZSS, NMEA 0183 output, NTRIP support and multiple geofence zones.
- RS232, RS485 and Modbus gateway - DB9 RS232 with RTS/CTS and RS485 in full and half duplex for console, serial over IP, modem, Modbus gateway or NTRIP client use.
- Inputs and outputs - A dry input, a galvanically isolated input, a 0-24V analog input with 4-20mA, an open collector output and a 40V 4A SPST relay, plus an input and output on the power connector.
- Wi-Fi and hotspot - Wi-Fi 4 in AP and STA modes for up to 100 users, mesh, fast roaming and a captive portal with a landing page.
- Industrial build and approvals - IP30 aluminium housing, operation from -40°C to 75°C, 9-30V DC or passive PoE power, and E-mark and UL Class I Div 2 approvals.
Specifications| Manufacturer | Teltonika | | Model | RUT956 | | Cellular | 4G LTE Cat 4 (up to 150/50Mbps), 3G (up to 21Mbps), 2G | | SIM | 2 x Mini SIM (2FF), automatic switching | | Ethernet | 1 x WAN + 3 x LAN, 10/100Mbps | | Wi-Fi | 802.11b/g/n (Wi-Fi 4), AP/STA, up to 100 users | | Serial | RS232 (DB9, RTS/CTS), RS485 full/half duplex (300-115200 baud) | | I/O | Dry input, isolated input, 0-24V analog input (4-20mA), open collector output, 40V/4A relay, plus input and output on the power connector | | GNSS | GPS, GLONASS, BeiDou, Galileo, QZSS, NMEA 0183, NTRIP | | USB and storage | 1 x USB-A 2.0, microSD up to 2TB | | CPU and memory | MediaTek MIPS 24KEc 580MHz, 128MB DDR2, 16MB Flash | | Operating system | RutOS (OpenWrt based) | | VPN | OpenVPN, WireGuard, IPsec, GRE, DMVPN, SSTP, L2TP, ZeroTier, Tinc | | Protocols | Modbus TCP/RTU, MQTT, BACnet, OPC UA, DNP3, DLMS/COSEM | | Antennas | 2 x SMA for LTE, 2 x RP-SMA for Wi-Fi, 1 x SMA for GNSS | | Power | 9-30V DC via 4-pin socket, passive PoE on LAN1 (Mode B, not 802.3af/at/bt compatible) | | Power consumption | Under 2W idle, under 7W max | | Housing and mounting | Aluminium and plastic, IP30; DIN rail, wall or flat surface (additional kit) | | Operating environment | -40°C to 75°C, 10%-90% humidity non-condensing | | Dimensions and weight | 110 x 50 x 100 mm, 287 g |
In the box- RUT956 router
- 9W power supply
- 2 magnetic mobile antennas (SMA, 3 m cable)
- 2 magnetic Wi-Fi antennas (RP-SMA, 1.5 m cable)
- Adhesive GNSS antenna (SMA, 3 m cable)
- RS485 connector block
- I/O connector block
- Ethernet cable (1.5 m)
- SIM adapter kit
- Quick start guide
|
