Interface Elgato Wave XLR 10MAG9901

Elgato Wave XLR Audio Interface

The Elgato Wave XLR is a compact audio interface that connects an XLR microphone to your computer over USB-C. It suits both dynamic and condenser microphones and combines clean gain, phantom power and zero-latency monitoring.

With the Wave Link software you can mix audio sources, apply effects and manage your voice for streaming, recording and calls. The capacitive button and the control dial on the unit give quick control without opening the software.

Key features

• Up to 75dB of gain - A microphone preamp with a 0 to 75dB range, suited to gain-hungry dynamic microphones as well as condenser microphones.
• Clipguard protection - Clipguard dynamically adjusts the input level to prevent distortion when your voice is too loud, and an LED indicator shows how much the gain was reduced (with Wave Link).
• 48V phantom power - 48VDC phantom power for condenser microphones, switched on with a two-second press of the dial or from Wave Link. It is recommended to turn it off for dynamic microphones.
• Zero-latency monitoring - A 3.5mm headphone output on the back lets you hear your own voice in real time, with a balance control between the microphone and computer audio.
• Quick hardware control - The dial changes the gain, the headphone volume and the mic and PC mix ratio, and the capacitive button on top mutes the microphone instantly.
• 24-bit recording quality - 24-bit sampling at 48 or 96kHz and a dynamic range of 100dB (120dB with Clipguard).

Specifications

In the box

• Wave XLR
• USB cable (USB-A to USB-C)
• Quick start guide