DAHUA PFH610V-IR-POE DH-PFH610V-IR-POE Color:white

DAHUA PFH610V-IR-POE Camera Housing

The DAHUA PFH610V-IR-POE is a 14-inch vandal-proof housing for installing a box camera with a lens outdoors and at high-risk sites. The case is made of die-cast aluminum alloy and plastic, rated IP66 against water and dust and IK10 against impact.

Inside the housing are an infrared light with a range of up to 100 m, a built-in PoE module and a temperature control system with heating and ventilation. The housing is powered by PoE+ and supplies the camera with PoE or 12 VDC, so the housing and the camera can be powered over the network cable.

Key features

• IR light up to 100 m - The built-in infrared module lights the scene up to 100 m in low light. The IR light can be controlled over the RS-485 port.
• PoE+ powered - The built-in PoE module takes PoE+ and supplies the camera inside with PoE or 12 VDC. The housing itself draws 14 W without the camera.
• Automatic heating and cooling - Heating turns on below 5°C and ventilation turns on at 20°C and above, so the housing operates from -40°C to 60°C.
• IP66 and IK10 - A die-cast aluminum case that resists water, dust and vandalism, with surge protection of ±4 kV common mode and ±2 kV differential mode.
• Room for camera and lens - The internal space of 255 x 90 x 70.5 mm or 215 x 90 x 83 mm fits a box camera with a lens, and the window is 59.4 mm in diameter.
• Wiper and washer connections - An alarm input to drive a wiper, two outputs for IR feedback and washer modules, sprinkling control and DIP switches for settings.

Specifications