PoE Injector Omada POE260S 2.5G 30W POE260S Color:black

Omada POE260S 2.5G 30W PoE Injector

The Omada POE260S is a PoE+ injector that carries power and data together over one Ethernet cable to an access point, IP camera or IP phone, even where there is no power outlet. Its ports run at up to 2.5Gbps, so it also suits Wi-Fi 6 and Wi-Fi 7 access points with 2.5G uplinks.

The injector complies with IEEE 802.3af/at, automatically detects the power needs of the connected device and supplies up to 30W. The power supply is built in, installation is plug-and-play with no configuration, and it can sit on a desk or mount on a wall.

Key features

• 2.5Gbps ports - The Data In port and the Power + Data Out port support 10/100/1000/2500Mbps, so the injector does not hold back fast access points.
• Up to 30W PoE+ - IEEE 802.3af/at compliance and up to 30W of power for PTZ cameras, access points and phones.
• Automatic power detection - The injector detects a standard PD and sets the required power by itself. It does not supply power to passive PoE devices.
• One cable for power and data - No outlet is needed near the device. At 2.5G the cable run reaches up to 100 m over Cat 5e or better.
• Simple installation - Plug-and-play with no configuration, an integrated power supply and mounting points for desktop or wall installation.

Specifications

In the box

• POE260S injector
• Power cord
• Wall mounting kit
• Installation guide